How to build a ceramic tiled shower in your bathroom
Don't slip up - install ceramic tiles in your shower
cubicle
Glamour And Power Of A Ceramic Tiled Shower by :
manoloK
If you want a strong, enduring yet affordable shower, tiling a shower with
ceramic tile is the best option for you. A shower built in Ceramic tiles is very
easy to clean.
Ceramic tiles will save your shower from the bites of humidity, dust mites and
fungi. The ceramic tiles, specially the glazed ones assure you safety of
waterproofing and protection from biological and chemical agents.
You have to indulge in a lot of labor for tiling a shower with ceramic tile. But
your effort will pay off in huge profits with an excellent finish.
Tiling The Shower Walls
Tiling a shower with ceramic tile requires you to go about the job in a planned
manner. The first step is all about laying the foundation for the shower walls.
Backer boards, such as Wonder Board or Durock cement board, will be ideal for
the walls. Being resistant to water, they will best meet the standards as base
for installing ceramic tiles to high-moisture areas.
Backer boards can easily be installed directly on walls and fixed firmly to wall
studs and ceiling beams with the help of hot-dipped galvanized nails or
galvanized wood screws. Once the backer boards are well set, you need to cover
all the joints with fiberglass mesh tape. Apply a coating of latex thin-set or
an adhesive mortar before going ahead with installing the ceramic tiles.
Tiling The Shower Floor
To tile the shower floor, you need a pre-sloping of the floor. Apply a layer of
mortar to the floor and structure a slope from the shower rim to the center of
the floor which homes the shower drain. This will direct the flow of water
towards the shower drain.
After the construction of the pre-slope plan for the installation of a shower
pan membrane liner, which is a resilient plastic liner.
Place the membrane liner underneath the pane of tiles and mortars to steer the
water that seeps through the floor grout to the shower drain beneath.
You will need to lay the pan membrane liner at the base of the shower area and
secure it to the sides of the shower wall frame using nails. You will also need
to cut out a slit in the membrane to slot in the adjustable shower drain
assembly.
Now its time for you to arrange the floor backer boards. An ultimate coat of
mortar will give it solidity. Now you will enter the last stage of tiling a
shower with ceramic tile.
Carefully install the tiles maintaining level and scales. The design should be
effectively centered. After the tiles are set and the grouting is restored,
adjust the shower drain assemblage.
About The Author
Easy
Kitchen Improvement Tips & Tricks, immediately
gain the knowledge to make your home a better living space for YOUR Family &
YOU. Loads of Home Improvement articles at "Do
It Yourself Tips"
Article Source:
http://www.articlecube.com